Samsung Dishwasher Repair Abu Dhabi

Possible cause: The dishwasher may detect an abnormal water level or a related sensing issue.

First checks: Clean the filter, use dishwasher-specific detergent and check that dishes are loaded correctly. Restart once after switching off for five minutes.

Possible cause: The wash pump may not circulate water correctly or may have an electrical or mechanical fault.

First checks: Switch the dishwasher off and retry once. If the code returns, pump and wiring inspection may be required.

Possible cause: Water is not entering the dishwasher as expected. The tap may be closed or the inlet hose or filter restricted.

First checks: Ensure the water tap is open, inspect the inlet hose for kinks and check accessible inlet filters according to the manual.

Possible cause: Insufficient water supply, restricted inlet hose or a water delivery problem.

First checks: Confirm water is available, the tap is open and the inlet hose is not bent or obstructed.

Possible cause: The dishwasher cannot drain water properly due to a blocked filter, drain hose or pump issue.

First checks: Clean the removable filter, inspect the accessible drain hose for kinks and check the sink drain connection.

Possible cause: The drain pump may be unable to start, may be obstructed or may stop during operation.

First checks: Cancel the cycle and check for visible debris around the removable filter area with power disconnected. Pump inspection may be needed.

Possible cause: A control button may be stuck or the panel may detect a continuously pressed key.

First checks: Check whether buttons move freely and dry the control panel. Persistent faults may require panel inspection.

Possible cause: The dispenser mechanism may be obstructed or its motor or electrical feedback may be faulty.

First checks: Check whether a detergent tablet is obstructing the dispenser. If the code remains, request professional inspection.

Possible cause: On applicable Waterwall models, the reflector or moving spray mechanism may not operate correctly.

First checks: Check for visible obstructions. The movement mechanism may need technical inspection.

Possible cause: The dishwasher may detect an abnormal incoming electrical supply or voltage condition.

First checks: Switch the appliance off and have the outlet and electrical supply checked by a qualified electrician. Avoid extension leads.

Possible cause: Some model-specific diagnostics associate this code with a door or operating condition that prevents a cycle from running.

First checks: Check that the door closes fully and racks or utensils do not obstruct it. Confirm the exact meaning in your model manual.

Possible cause: On models that display these codes, drying fan or ventilation operation may be affected.

First checks: Ensure the external vent is not obstructed and that dishes are not blocking the internal vent. Motor inspection may be needed.

Possible cause: The dishwasher may detect an abnormal heating condition or temperature reading.

First checks: Switch off for at least five minutes. Check the model manual and arrange inspection if the code returns.

Possible cause: Some models use these codes for high-temperature or drying-related conditions.

First checks: Check water supply temperature and ensure the drying vent is not blocked. Persistent faults need inspection.

Possible cause: The leak sensor may detect moisture or water in the dishwasher base area.

First checks: Turn off the water supply and disconnect power if safe. Do not keep restarting the appliance. Arrange leak inspection.

Possible cause: The dishwasher may detect more water than expected inside the appliance.

First checks: Turn off the water supply. Check for excessive foam or incorrect detergent use. If water continues entering, seek professional help.

Possible cause: A selected zone wash or half-load function may not operate correctly.

First checks: Turn off the appliance, restart and try a normal programme without the special option. Persistent codes need diagnosis.

Possible cause: The thermistor or temperature sensing circuit may be providing an abnormal reading.

First checks: Switch off for five minutes and retry once. If the code returns, temperature sensor and wiring inspection may be needed.

Possible cause: On certain models, these codes may relate to temperature monitoring or drying operation.

First checks: Keep the vent unobstructed and check the model-specific manual. Request inspection if the error persists.